One trick that I've done that looks really cool (and gives an old wood look) is to stain with a black stain, sand, and stain again with a lighter stain that is. Also, keep in mind that as that table was previously stained, it might not take stain well a second time. Many have tried it and few stick with it, so maybe the best it can do doesn't measure up to what is hoped for. India ink will stain anything that it comes into contact with, including you. That could produce a mottled final result, if you recoat.Įbonizing is one of those things that is pretty straightforward and you mostly learn by doing. The color is not deep and is easy to sand it partially or mostly off. If you feel the need to sand down the raised grain, use 600 grit or finer, lightly applied. A second coat can darker things only a little, and I've never noticed more coats having any effect.į. One coat causes 85% of the color change, in my experience. You can 'paint' some brewed black tea onto the wood and let it soak in prior to applying the solution, if the wood has a low tannin level or you want a darker color.Į. This ink was made, and is still made, by mixing lamp black or carbonized pine wood with gum or gelatine and camphor. (Heartwood and sapwood will react differently) Cherry and alder can look a little gray for my taste. Different woods take the stain differently, presumably related to the tannin content of the wood. If you want African blackwood black, you will probably have to use something like Fiebig's boot black or India ink for the stain, which I have not yet tried.Ĭ. There will be variability in the color, with some areas more brownish that others, just like natural ebony. The result with walnut normally produces something comparable to ebony, which means it's not a solid, uniform color like latex paint. Could there be some finish or glue on it? Could you have compressed or burnished the wood in some areas? It would be really hard to have a solution with unevenly distributed chemical, assuming it had worked long enough for the steel wool to all be dissolved.ī. If you got uneven, spotty results, it's probably the wood.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |