THIS INTERFACE SHOULD BE CONNECTED AT THE NAVIGATION COMPUTER/SCREEN CONTROLLER AND NOT BEHIND THE SCREEN. Unlock Control-In-Motion - Unlock certain features that are locked while driving.įactory Camera In-Drive - Vehicle must be equipped with a factory camera. Unlock Navigation-In-Motion - Vehicle must be equipped with a navigation system. Unlock DVD-In-Motion - Vehicle must be equipped with a factory DVD player. Unlock Video-In-Motion - Vehicle must be equipped with a factory AUX video input or factory DVD player. Video Unlock - is controlled via factory radio buttons, all factory features continue to operate as before. Video Switching - is controlled via factory radio buttons, all factory features continue to operate as before. Right Camera Input: is dedicated to an installation of a right lane watch camera. Right camera can be turned on automatically with a right turn signal or can be turned on manually at any time.Īny of The Above Video Inputs can also be used as an input for a 360 surround view camerasĬLICK HERE FOR THE LIST OF AN AVAILABLE SURROUND VIEW CAMERAS The left camera can be turned on automatically with a left turn signal or can be turned on manually at any time.ĬLICK HERE FOR THE LIST OF AN AVAILABLE LANE WATCH CAMERAS Left Camera Input: is dedicated to an installation of a left lane watch camera. The front camera can be turned on automatically after the reverse and will stay on the screen up to 10 MPH, or can be turned on manually at any time.ĬLICK HERE FOR THE LIST OF AN AVAILABLE FRONT CAMERAS VIDEO INPUTS AS MULTIPLE CAMERA SWITCHING - If the vehicle is not equipped with factory rear view camera please use this interface:įront Camera Input: is dedicated to an installation of a front camera. Micro USB Connector is dedicated for future software updates.ĬLICK HERE FOR THE MICRO USB UPDATE CABLE - NOT REQUIRED IF YOU ALREADY OWN ONE, IT IS A REGULAR (USB A TO USB MICRO B ) CABLE Examples of the video sources: DVD player, Game Console, Digital Media Player, HDD, iPhone, iPad, iPod Video. If the vehicle is not equipped with a factory DVD player, an external video source is needed to display video on the factory screen. NavTool GMBOX3.0 is video-in-motion enabled for off-road (away from any public roads) use, the video image will stay on the screen even while the vehicle is in motion, however, we do not recommend doing this. The video and audio will always be perfectly in sync. If the vehicle does not have a factory installed AUX audio jack, then an auxiliary audio input adapter or an audio FM modulator is needed to connect audio signals from an external Audio/Video source to the factory audio system. ![]() ![]() NavTool GMBOX3.0 is a video-only input interface and does not have any audio inputs. It simply unlocks features that are locked during driving, it's 100% seamless and there is no change to your factory setup or operation. NavTool GMBOX3.0 is an externally wired plug and play interface that is installed behind the factory radio. NavTool plug and play installation harnesses are made using O.E.M. NavTool GMBOX3.0 + GMQUAD1 are 100% plug and play - no wire cutting required. If the vehicle is not equipped with a factory navigation system please see our add-on navigation module: If the vehicle is not equipped with a factory rear view camera please use this interface: NavTool GMBOX3.0does not replace or add a factory navigation system it creates additional video input capabilities for the factory installed navigation or color information screen. NavTool GMBOX3.0 adds 3 composite video inputs to your factory navigation or color information screen.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |